residential
UV-stable polyaspartic floor coatings engineered for outdoor concrete — slip-resistant, freeze-thaw durable, and designed to withstand Utah's intense sun, snow, and temperature swings without yellowing, peeling, or chipping.
Overview
Outdoor concrete takes the full force of Utah's climate — blistering summer UV, sub-zero winter freezes, snowmelt, rain, and everything in between. Bare patios and porches crack, spall, stain, and develop that chalky, worn-out look that drags down your entire outdoor living area. B&R Concrete Coatings applies UV-stable polyaspartic floor systems specifically formulated for exterior exposure, giving your patio or porch a clean, slip-resistant surface that resists freeze-thaw cycling, won't yellow in direct sunlight, and turns weathered concrete into a finished outdoor room you'll actually want to use year-round. From backyard entertaining spaces to covered front porches, we deliver the same commercial-grade performance our garage floors are known for — engineered to survive outdoors.
Our process
Every job follows the same proven sequence — because consistency is what makes our Limited Lifetime Warranty worth the paper it's printed on.
Industrial diamond grinders open the concrete pores and create the mechanical profile required for permanent adhesion. Outdoor slabs often have smoother finishes from troweling or brooming, so thorough profiling is critical to prevent peeling under thermal stress.
Crack and joint repair is job-specific and quoted as an additional cost when needed.
A high-solids epoxy base coat bonds to the prepared slab and provides the chemical anchor for the system. For exterior applications, we use moisture-tolerant formulations that perform reliably on slabs exposed to ground moisture and irrigation runoff.
Vinyl flake chips are broadcast to full coverage, creating a textured surface with built-in slip resistance — critical for outdoor areas that get wet from rain, sprinklers, pool splash, or snowmelt. Flake color is chosen to complement your home's exterior palette.
The final layer is a commercial-grade polyaspartic clear coat engineered for outdoor UV exposure. Unlike standard epoxies that yellow and chalk in sunlight, polyaspartic remains crystal clear and flexible through years of direct sun, rain, and freeze-thaw cycling.
Why choose this system
Polyaspartic chemistry resists ultraviolet degradation that causes standard coatings to yellow, chalk, and fade. Your patio keeps its fresh, clean appearance even in south-facing full-sun exposure year after year.
Utah's winters cycle concrete through dozens of freeze-thaw events each season. Our system remains flexible at low temperatures and won't crack, delaminate, or flake when water freezes beneath or on top of the coating.
The full-flake texture provides reliable traction even when surfaces are wet from rain, snowmelt, sprinklers, or pool splash — a critical safety feature for outdoor living areas where bare feet and kids are common.
Sealed against BBQ grease, sunscreen, plant stains, bird droppings, rust from furniture legs, and de-icing salts. Spills stay on the surface and wipe away without penetrating or discoloring the concrete.
A coated patio feels intentional — like a finished room rather than a neglected slab. It's the difference between stepping onto a clean, designer surface and stepping onto stained, cracked concrete.
Sweep off leaves, rinse with a hose, and you're done. No annual resealing, no pressure washing stains out of porous concrete, no fighting efflorescence or algae growth in shaded areas.
Ideal for
Common questions
We install a commercial-grade full-flake system with an epoxy base coat and a durable polyaspartic topcoat. This creates a beautiful, long-lasting finish that is far stronger than DIY kits or paint-on products.
Most projects are completed in one day. You can typically walk on the floor within 24 hours and park vehicles on it within 48–72 hours.
With proper installation and care, our coating systems are designed to last a lifetime.
Yes. Every floor is mechanically diamond-ground to properly open the concrete and create the best possible bond. We never use acid etching or shortcut prep methods.
Yes. We can repair cracks, pits, spalling, and other surface imperfections prior to coating your floor. Because the amount of repair work varies from project to project, concrete repairs are quoted separately and added as an additional cost when needed. During your estimate, we'll evaluate the condition of your concrete and provide transparent pricing for any recommended repairs.
Our full flake system adds texture that provides excellent slip resistance, even when wet.
Pricing depends on the size and condition of the concrete as well as the coating system selected. We provide free estimates and transparent pricing.
We stand behind our floors with a limited lifetime warranty for the original homeowner. Our warranty covers defects related to product failure or installation issues, including peeling, delamination, or coating failure under normal residential use. The warranty is valid only for the original purchaser and is non-transferable if the home is sold. Damage caused by the homeowner — including gouges, scratches, impact damage, chemical abuse, burns, or damage caused by improper use or neglect — is not covered. Natural concrete movement, foundation cracking, and acts of nature are not covered. If a failure occurs due to our installation or a product defect, we will repair the affected area at no cost to you. We use commercial-grade materials and proven installation methods so you can feel confident your floor is built to last.
Yes. In most cases, we can restore older concrete surfaces, even if they have stains, minor cracks, or previous coatings that need to be removed.
Yes. We can coat patios, porches, walkways, and other exterior surfaces using UV-stable products designed for outdoor use.
Yes. We are fully licensed and insured for your protection and peace of mind.
We offer a variety of flake blends and solid colors to match your home or workspace.
Yes. Our systems use commercial-grade products and professional surface preparation, providing far greater durability and longevity than big-box store kits.
We coat garages, basements, patios, porches, shops, warehouses, and commercial spaces.
We're a husband-and-wife-owned business. Brandon brings years of construction experience, and Robyn manages the customer experience and operations. We use premium materials, proven preparation methods, and treat every project as if it were our own.
Get started
Ready to turn your patio into a finished outdoor living space? Contact B&R Concrete Coatings for a free estimate — we'll help you choose the right color blend and system for your outdoor area.
