residential
Premium polyaspartic flake garage floor systems engineered for Utah's harsh climate — resistant to hot tires, road salt, chemicals, and daily abuse, installed in a single day with a Limited Lifetime Warranty.
Overview
Your garage floor takes more abuse than any other surface in your home. Every day it endures hot tires fresh off summer asphalt, road salt and de-icers tracked in through winter, oil drips, chemical spills, dropped tools, and the constant grinding of foot traffic. Bare concrete can't keep up — it stains, cracks, dusts, and deteriorates year after year. B&R Concrete Coatings transforms garage floors across Utah with our premium polyaspartic flake system — the same commercial-grade technology used in dealership showrooms and aircraft hangars, scaled for residential garages and installed in a single day. The result is a floor that looks like a showroom, cleans like a countertop, and performs for 15+ years without peeling, yellowing, or hot-tire lifting.
Our process
Every job follows the same proven sequence — because consistency is what makes our Limited Lifetime Warranty worth the paper it's printed on.
Our planetary grinders mechanically profile the entire slab to a CSP 2–3, removing oil stains, previous sealers, paint, and the weak surface layer of concrete. This opens the pores for deep mechanical and chemical bond — the foundation of a floor that never peels.
Crack and joint repair is job-specific and quoted as an additional cost when needed.
A thick, 100%-solids epoxy base is rolled across the prepared slab. This layer bonds permanently to the concrete, provides impact and chemical resistance, and serves as the adhesive bed that captures the decorative flake broadcast.
While the epoxy is wet, our crew hand-broadcasts vinyl flake chips to full rejection — completely saturating the surface until no epoxy is visible. This creates a seamless, uniform appearance with built-in texture for slip resistance and a look that hides dirt between cleanings.
After cure, excess flake is scraped away and the surface is lightly sanded smooth. A UV-stable polyaspartic topcoat is then applied, encapsulating every flake chip in a hard, glossy shell that resists hot tires, chemicals, UV yellowing, and abrasion for the life of the floor.
Why choose this system
Polyaspartic topcoats don't soften under heat the way cheap epoxy does. Park your car minutes after driving on 140°F summer asphalt — no peeling, no sticking, no marks. Ever.
Utah winters mean road salt, mag chloride, and de-icers tracked in daily. Our sealed system shrugs off these corrosives along with oil, brake fluid, gasoline, and household chemicals.
Most two- and three-car garages are completed in a single day. Walk on your floor within 24 hours and park vehicles within 48–72 hours — no week-long cures or multi-day disruptions.
South-facing garages with open doors get blasted by UV all day. Polyaspartic chemistry stays crystal clear and never ambers or yellows, keeping your floor looking fresh for years.
The full-flake texture provides reliable traction even when wet from rain, snowmelt, or washing your car inside the garage. No more slipping on a damp, smooth concrete slab.
Sealed, seamless, and non-porous — dust, dirt, and spills stay on the surface where a leaf blower, broom, or mop handles them in minutes. No more scrubbing oil stains out of bare concrete.
Ideal for
Common questions
We install a commercial-grade full-flake system with an epoxy base coat and a durable polyaspartic topcoat. This creates a beautiful, long-lasting finish that is far stronger than DIY kits or paint-on products.
Most projects are completed in one day. You can typically walk on the floor within 24 hours and park vehicles on it within 48–72 hours.
With proper installation and care, our coating systems are designed to last a lifetime.
Yes. Every floor is mechanically diamond-ground to properly open the concrete and create the best possible bond. We never use acid etching or shortcut prep methods.
Yes. We can repair cracks, pits, spalling, and other surface imperfections prior to coating your floor. Because the amount of repair work varies from project to project, concrete repairs are quoted separately and added as an additional cost when needed. During your estimate, we'll evaluate the condition of your concrete and provide transparent pricing for any recommended repairs.
Our full flake system adds texture that provides excellent slip resistance, even when wet.
Pricing depends on the size and condition of the concrete as well as the coating system selected. We provide free estimates and transparent pricing.
We stand behind our floors with a limited lifetime warranty for the original homeowner. Our warranty covers defects related to product failure or installation issues, including peeling, delamination, or coating failure under normal residential use. The warranty is valid only for the original purchaser and is non-transferable if the home is sold. Damage caused by the homeowner — including gouges, scratches, impact damage, chemical abuse, burns, or damage caused by improper use or neglect — is not covered. Natural concrete movement, foundation cracking, and acts of nature are not covered. If a failure occurs due to our installation or a product defect, we will repair the affected area at no cost to you. We use commercial-grade materials and proven installation methods so you can feel confident your floor is built to last.
Yes. In most cases, we can restore older concrete surfaces, even if they have stains, minor cracks, or previous coatings that need to be removed.
Yes. We can coat patios, porches, walkways, and other exterior surfaces using UV-stable products designed for outdoor use.
Yes. We are fully licensed and insured for your protection and peace of mind.
We offer a variety of flake blends and solid colors to match your home or workspace.
Yes. Our systems use commercial-grade products and professional surface preparation, providing far greater durability and longevity than big-box store kits.
We coat garages, basements, patios, porches, shops, warehouses, and commercial spaces.
We're a husband-and-wife-owned business. Brandon brings years of construction experience, and Robyn manages the customer experience and operations. We use premium materials, proven preparation methods, and treat every project as if it were our own.
Get started
Join the Utah homeowners who've upgraded their garage with B&R Concrete Coatings. Schedule your free estimate today — most garages are quoted on the spot and installed within two weeks.
