B&R CoatingsB&R Coatings
Basement Floor Coatings

residential

Basement Floor Coatings

Transform your basement with a seamless, moisture-resistant floor coating system designed to handle Utah's below-grade conditions — from humidity and hydrostatic pressure to everyday foot traffic.

Lifetime warrantyFree estimates1-day install
Call nowor fill out the form below

Free estimate

Get your quote today

Protected by reCAPTCHA. Privacy policy

Overview

Why it matters.

Basements face challenges that no other room in your home does. Below-grade slabs are constantly exposed to ground moisture, temperature swings, and hydrostatic pressure that can push water vapor straight through bare concrete. The result is a cold, dusty surface prone to staining, efflorescence, and musty odors — hardly the foundation for a livable space. B&R Concrete Coatings solves these problems with professional-grade floor coating systems engineered specifically for below-grade environments. Whether you're finishing a new basement, upgrading an existing recreation room, or converting raw concrete into a home gym, our coatings create a moisture-resistant barrier that keeps your floor dry, clean, and looking great for years to come.

Basement Floor Coatings

Our process

Step by step, no shortcuts.

Every job follows the same proven sequence — because consistency is what makes our Limited Lifetime Warranty worth the paper it's printed on.

  1. 01

    Diamond Grinding & Surface Preparation

    Using industrial diamond grinders, we mechanically profile the concrete to open its pores and create a surface that coatings bond to at a molecular level. This step is non-negotiable — it's what separates a coating that lasts fifteen years from one that peels in two.

  2. 02

    Crack & Joint Repair

    Crack and joint repair is job-specific and quoted as an additional cost when needed.

  3. 03

    Moisture-Mitigating Base Coat

    A high-solids epoxy base coat is applied to seal the slab and block residual moisture vapor from compromising topcoat adhesion. This layer provides the chemical bond that anchors the entire system.

  4. 04

    Decorative Flake Broadcast or Metallic Layer

    Depending on your chosen finish, we broadcast decorative vinyl flake to full coverage or apply a metallic epoxy layer for a custom swirl effect. Both options hide imperfections and add slip resistance.

  5. 05

    UV-Stable Polyaspartic Topcoat

    A commercial-grade polyaspartic clear coat locks everything in place and provides the final wear surface — resistant to abrasion, chemicals, and UV light so the color never yellows or fades.

Why choose this system

Built-in advantages you'll notice every day.

Moisture Resistant

Our system creates a sealed barrier against ground moisture and vapor transmission, preventing efflorescence, mold growth, and musty odors common in Utah basements.

Warm & Comfortable Underfoot

Coated floors feel noticeably warmer than bare concrete and pair seamlessly with radiant heating systems for year-round comfort.

Seamless & Easy to Clean

No grout lines, no carpet fibers, no places for dust and allergens to hide. A quick mop or vacuum is all it takes to keep your floor spotless.

Durable for Any Use

From dropped weights in a home gym to rolling office chairs in a workspace, our coatings resist impact, abrasion, and heavy furniture without scuffing or peeling.

Design Flexibility

Choose from dozens of flake color blends, solid hues, or one-of-a-kind metallic finishes to match your basement's purpose and style.

Fast Installation

Most basement floors are completed in a single day, with light foot traffic possible within 24 hours so your project stays on schedule.

Ideal for

Perfect for these spaces.

  • Finished basements and rec rooms
  • Home gyms and workout areas
  • Home offices and studios
  • Kids' playrooms
  • Laundry and utility rooms
  • Media and entertainment rooms
  • Wine cellars and storage areas

Common questions

FAQ

We install a commercial-grade full-flake system with an epoxy base coat and a durable polyaspartic topcoat. This creates a beautiful, long-lasting finish that is far stronger than DIY kits or paint-on products.

Most projects are completed in one day. You can typically walk on the floor within 24 hours and park vehicles on it within 48–72 hours.

With proper installation and care, our coating systems are designed to last a lifetime.

Yes. Every floor is mechanically diamond-ground to properly open the concrete and create the best possible bond. We never use acid etching or shortcut prep methods.

Yes. We can repair cracks, pits, spalling, and other surface imperfections prior to coating your floor. Because the amount of repair work varies from project to project, concrete repairs are quoted separately and added as an additional cost when needed. During your estimate, we'll evaluate the condition of your concrete and provide transparent pricing for any recommended repairs.

Our full flake system adds texture that provides excellent slip resistance, even when wet.

Pricing depends on the size and condition of the concrete as well as the coating system selected. We provide free estimates and transparent pricing.

We stand behind our floors with a limited lifetime warranty for the original homeowner. Our warranty covers defects related to product failure or installation issues, including peeling, delamination, or coating failure under normal residential use. The warranty is valid only for the original purchaser and is non-transferable if the home is sold. Damage caused by the homeowner — including gouges, scratches, impact damage, chemical abuse, burns, or damage caused by improper use or neglect — is not covered. Natural concrete movement, foundation cracking, and acts of nature are not covered. If a failure occurs due to our installation or a product defect, we will repair the affected area at no cost to you. We use commercial-grade materials and proven installation methods so you can feel confident your floor is built to last.

Yes. In most cases, we can restore older concrete surfaces, even if they have stains, minor cracks, or previous coatings that need to be removed.

Yes. We can coat patios, porches, walkways, and other exterior surfaces using UV-stable products designed for outdoor use.

Yes. We are fully licensed and insured for your protection and peace of mind.

We offer a variety of flake blends and solid colors to match your home or workspace.

Yes. Our systems use commercial-grade products and professional surface preparation, providing far greater durability and longevity than big-box store kits.

We coat garages, basements, patios, porches, shops, warehouses, and commercial spaces.

We're a husband-and-wife-owned business. Brandon brings years of construction experience, and Robyn manages the customer experience and operations. We use premium materials, proven preparation methods, and treat every project as if it were our own.

Get started

Ready for a floor that lasts?

Ready to transform your basement into a clean, comfortable living space? Contact B&R Concrete Coatings for a free estimate — we'll help you choose the perfect system for your home.